Brick Paver Installation & Edging



Staging of material

The majority of paver projects will differ depending on access, website conditions, project size and of course, the weather. Mindful consideration needs to be taken to determine the time to begin the paver installation.

The foreman or job supervisor need to always have the products (sand/ pavers) distributed around the job site for easy and effective installations. Paver pallets/bundles need to be put in a way not to interfere with the paver installation. The appropriate pallet/bundle placement can make the real project installation much easier and quicker by reducing the general labor of managing the material.

Brick paver patterns

Pavers can be put in many different patterns depending on their shape. Each paver shape will normally have several different hatch patterns that are supplied by the manufacturer.

Professionals require to take into consideration the traffic weight loads on their paver projects. In a lot of applications around the world, it has been shown that pavers laid in a herringbone pattern have actually carried out sufficiently.

Pavers that are 60 mm (2 - 3/8 in) density are suitable for pedestrian applications. Pavers that are going to be used in industrial or commercial applications need to be 80 mm (3 - 1/8 in) in thickness.

Reference/starting point for brick paver installation

There are a number of conditions that identify the beginning point of a paver task.

When starting to install pavers it is best to snap a real straight chalk line on the surface of the bed linen sand or pull a real straight string line above the surface of the bedding sand at the completed elevation of the pavers This will assist as a guide for keeping straight joint lines and will likewise allow the installer to make adjustments in the alignment of the pavers.

Structures and concrete suppressing are usually not straight and should not be used for establishing straight joint lines. The usage of string lines is necessary to figure out the real straightness of the edge. As the paver installation progresses, the string lines will help lessen the requirement for little trim pieces.

These will maintain a minimum joint width and allow the bedding and jointing sand to go into between each paver. Pavers with spacer bars are normally not laid in snug versus each other considering that a string line will supply consistent joint spacing.

Installation of brick pavers.

One of the most widely utilized approaches for the installation of pavers is hand installation of each paver. It is best to set up a single row of pavers along one of the real straight lines that you have actually pulled or above the bedding sand. The finest technique is to put a paver against another one and let it slide down into the bedding sand.

When installing pavers on a steep grade, they should be set up at the base of the grade going uphill. This will avoid the pavers from sneaking as they are being laid.

The finest method for setting up pavers on big tasks is to install them mechanically. There are a couple items a contractor should think about prior to setting up pavers mechanically:

1.) Mechanical installers are only capable of installing pavers in certain patterns.

2.) The specialist needs to ensure that the manufacturer is capable of manufacturing and bundling pavers in the desired pattern on the pallets for simple mechanical installation.

3.) Specialists might experience a color blending situation coming off the packages of pavers Poor color mixing might result in a patchy looking installation. Most makers follow color mixing on each bundle of pavers, however it is the professional's obligation to make sure proper mixing in the field.

Cutting treatments for brick pavers.

Professionals generally have two methods of cutting pavers. Pavers are cut either by 1). A double bladed guillotine or by 2). A gas powered cut off saw or brick saw which is geared up with a diamond blade. The diamond blade cut-off saw or brick saw will provide a much cleaner and more precise cut. A lot of brick saws will have a hose pipe attachment on them which will permit the operator to cut the pavers damp. When cutting pavers wet, it will help decrease dust and will extend the diamond blades life also. The operator of the brick saw ought to always cut the pavers far from the surface area of the paver field when cutting wet, due to that the pavers will produce a slurry that will stain the paver surface. Pavers that are cut need to not fit tight, enough spacing ought to be available for jointing sand.

The brick saw operator should Patio Pavers West Palm Beach constantly wear the correct security that is needed for running a saw, such as eye, ear, respiratory and hand defense ).

Edging types

Edge restraints play a significant function in the overall success of an interlocking pavement installation Edging restraints eliminate lateral motion of the pavers and hold the pavers firmly together. Especially at the external perimeter of the paver application, without an edging restraint, your task is guaranteed to stop working gradually.

Usually manufactured edge restraints are the most frequently used by specialists. Manufactured edging restraints can vary from, plastic edging, steel and aluminum, timbers or precast concrete and stone.

Edging installation.

This could result in the migration of the bedding sand and ultimate lateral movement of the pavers. If there is a possibility of losing bedding sand in between the pavers and the edge restraint, then geo textile fabric is suggested. When a space between the pavers and the edging surpasses 3/8" (10mm), then the area should be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers need to be compressed. The whole area that is to be compressed need to be swept clean of any foreign items and particles that can cause scratching or scuffing on the surface of the pavers.

It is necessary to have a compactor that can exert between 3000lbs. And 5000 pounds. Of centrifugal compaction force. In addition, it is important that the first compaction occurs prior to any jointing sand has been applied to the pavers. If jointing sand is applied to the pavers prior to compaction happens, this can cause a bridging problem and will not enable the joints to be entirely filled with jointing sand. This can also prevent the pavers from being correctly set into the bed linen sand.

When compacting the pavers, it is suggested that you make a minimum of 2 passes in various directions across the pavers. This will enable the pavers to be appropriately embeded in the bed linen sand and will force the bedding sand up into the joints from the bottom of the pavers.

The compaction of the pavers is extremely vital to the last efficiency of the pavers. Failure to do proper compaction can result in deformations and pavement failure gradually.


Paver pallets/bundles must be positioned in a way not to interfere with the paver installation. One of the most widely used techniques for the installation of pavers is hand installation of each paver. The operator of the brick saw ought to constantly cut the pavers away from the surface area of the paver field when cutting damp, due to the reality that the pavers will create a slurry that will stain the paver surface. Edging restraints eliminate lateral movement of the pavers and hold the pavers firmly together. When a space in between the pavers and the edging goes beyond 3/8" (10mm), then the area needs to be filled with cut pavers.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Brick Paver Installation & Edging”

Leave a Reply

Gravatar